Connecting Projector LP 130 to Laptop Computer
There are six steps to connect a projector to the laptop for a presentation.
1. Connect the projector with the laptop using the computer cable
2. Plug in the projector to the power switch
3. Turn on the projector's lamp
4. Adjust the image position: Elevating, Zooming, Focus
5. Plug in the laptop to the power switch
6. Turn on the laptop
… Present!!!
See the attached picture for a clear picture instruction!
If you like to see the image on the laptop before present to the audience,
press the Fn key and the F7 (or F5) key at the same time. To switch it
back, do this again. Use the toggle button (Fn+CRT/LCD) combo a couple
of times until both displays, Laptop and Projector will be active.
Some other important information:
InFocus projector must have both following settings turned ON; under the projector's own menu, (Menu button on top of projector) go to the Image menu and choose AutoImage - ON and Resize - ON.
1. To use the "InFocus" projector, press the source button on the projector to select "Computer Analog" for presentation.
2. Remote control is not available in Window's 95 laptops.
Back to Information Technology
Support Page 